| 1. | Study on measurement method of laser beam quality parameter
激光光束质量参数测量方法的研究 |
| 2. | Some aspects of laser beam quality
对激光光束质量一些问题的认识 |
| 3. | Cause analysis and treatment of accident caused by overhanging beam quality
悬臂梁质量事故的原因分析及处理方案 |
| 4. | The optimum configurations of opos are determined by the pump beam quality in nonlinear crystals
Opo的最佳结构的关键取决于非线性晶体中的泵浦光的质量。 |
| 5. | Shearing interferometric investigation on degradation of light beam quality by the aerodynamic window ' s flow field
用剪切干涉法测气动窗口流场对光束质量的影响 |
| 6. | An experimental approach is given for the measurement of the beam quality factors of an ingaas / algaas sch dqw laser
本文还通过实验测量了ingaas algaasschdqw激光器的光束质量因子m ~ 2 。 |
| 7. | The goal of aero - optical research should be to improve or avoid the laser beam quality degradation caused by aero - medium
气动光学研究的最终目的应该是改善或避免由于气动介质引起的光束质量下降。 |
| 8. | Beam quality of the output laser is dependent on not only the fiber ' s structural parameter but also the launching conditions of laser
输出激光的光束质量不仅与光纤的结构参数有关，而且还与激光入射条件有关系。 |
| 9. | It is well known that nonlinear self - focusing effect is one of the important factors to limit icf laser energy and worsen beam quality
实践表明，非线性自聚焦效应是限制icf驱动器激光输出能量及破坏光束质量的主要因素之一。 |
| 10. | How to improve the output energy and beam quality were two most noteworthy problems in the building of high power solid - state laser facility
提高系统能量转换效率与输出光束质量一直是研制高功率固体激光系统极为关注的两类重要问题。 |
